Commercial Roof Inspections in Ypsilanti, MI: Photos, Findings & Testing

A commercial roof often gives small warning signs before it leaks. A seam starts to lift, sealant pulls away from a pipe, or debris blocks a drain. On a low-slope roof, those defects can be hard to spot from the ground. In Ypsilanti, snowmelt, repeated freezing and thawing, and summer storms can make an existing problem worse.

Commercial roof inspections in Ypsilanti, MI, can help owners and property managers spot visible damage before it spreads. This guide explains what inspectors look at, how photos and written findings help you act on what they find, and when a separate test may be needed.

Commercial roof inspection in Ypsilanti, MI

Why Commercial Roof Inspections Matter for Ypsilanti Properties

Warehouses, retail centers, offices, schools, and other buildings around Ypsilanti use a range of roof systems, including TPO, EPDM, PVC, modified bitumen, built-up roofing, and metal. Each system wears differently, but the same seasonal conditions can put stress on the roof:

  • Freezing and thawing: Water can freeze in existing cracks or gaps and make them worse.
  • Snow and ice: Snow can drift near parapets and equipment. Ice around an outlet can slow drainage during a thaw.
  • Ponding water: A blocked drain, poor slope, or a low spot can leave water standing long after rain.
  • Sun and temperature swings: Repeated heating and cooling can stress seams, flashing, and fasteners.

Regular inspections help you prioritize repairs, plan maintenance, and keep a record of the roof’s condition. See Armor’s commercial roof inspection guide for suggested timing, and check your warranty for any required inspection schedule.

What a Commercial Roof Inspection Covers

The scope depends on the roof system, the reason for the visit, and which areas the inspector can safely access. A visual inspection can cover these areas:

1. Roof Perimeter and Edges

Look for loose or lifted edge metal, open joints at coping caps, and visible damage along parapet walls. Edges and corners deserve attention because they can see higher wind forces than the center of the roof.

2. The Field of the Roof

The field is the large open area of the roof. Inspectors look for punctures, splits, blisters, exposed reinforcing fabric, loss of protective granules, and signs of standing water.

3. Seams and Laps

Where sheets overlap, the inspector looks for open joints, lifted edges, or wrinkles. A fishmouth is a small opening where a wrinkle lifts the edge of an overlap. Seam probing may be appropriate for some roof systems and scopes.

4. Flashing

Flashing seals the transitions at walls, edges, and equipment curbs. Inspectors look for cracks, separation, loose termination bars, and deteriorated sealant.

5. Penetrations

Pipes, vents, conduit, skylights, and exhaust fans interrupt the roof surface. Check the boots, flashing, or sealant pockets around them for splits, gaps, or loose parts.

6. Drainage Components

Inspectors look at accessible drains, scuppers, gutters, and downspouts for debris, damaged strainers, and signs that water has been backing up or collecting nearby.

7. Rooftop Equipment and Curbs

Areas around HVAC units, equipment supports, and walkway pads can show wear from service traffic. Check whether pads have shifted and whether nearby curb flashing is pulling away.

8. Interior Signs, When Access Is Included

Stains, drips, or visible corrosion can help narrow down where to investigate next. Water can travel before it appears indoors, so a ceiling stain alone doesn’t establish where it entered. See Armor’s commercial roof inspection guide for Lansing, MI for more on documenting conditions and inspection limits.

Common Observable Defects Found During Inspections

TPO and PVC Roofs

Look for open or lifting seams, punctures, cracked flashing, and exposed reinforcing fabric. A seam that looks intact may still need a closer check.

EPDM Roofs

Common findings include lifted seam tape, punctures, and rubber that has pulled tight at corners or walls. Termination bars that secure the membrane at walls can also loosen.

Modified Bitumen Roofs

Inspectors may see blisters, granule loss, open laps, cracked flashing, or a pattern of surface cracks sometimes called alligatoring.

Built-Up Roofing (BUR)

Look for bare spots where gravel surfacing has shifted, splits, blisters, ridges, and deteriorated seals around roof openings.

Metal Roofs

Rust, loose fasteners, worn washers, gaps at panel laps, and damaged panels are common signs to document.

On any roof type, note debris at outlets, worn walkway pads, loose materials after a storm, and earlier patches with lifted edges. Water still standing about 48 hours after rain is a reason to investigate drainage. On a dry day, dirt rings and debris lines can show where water collected, but they don’t show how long it stayed there.

How Photographs and Written Findings Are Documented

A useful inspection record helps you find the same area again, understand what needs attention first, and compare its condition during the next visit.

Photographs

Pair a wide shot that shows the location with a close-up of the defect. A label or photo number can connect both views to the written finding. Include scale where helpful, and use baseline photos to track changes over time.

Written Findings

Armor’s commercial roof inspection service includes a condition report and repair recommendations when indicated. A useful report can include:

  • Roof details: The property address, roof section, system type, and approximate age if known.
  • Condition summary: A plain-language description of the roof’s overall state.
  • Individual findings: What the inspector saw, where it was found, and any related photos.
  • Priorities and next steps: What needs repair soon, what can be monitored, and what may warrant further testing.
  • Limits: Areas that weren’t accessible and conditions that couldn’t be confirmed visually.

Confirm whether labeled photos, a roof sketch, or priority ratings are included in your inspection scope.

Observation vs. Testing: Know the Difference

A visual inspection records conditions that can be seen in accessible areas. It can flag a soft spot or a blister for further investigation, but it can’t confirm what is happening beneath the surface.

Visual roof inspection vs infrared testing in Ypsilanti, MI

What a Visual Inspection Can Tell You

A visual inspection can locate visible defects such as open laps, loose flashing, blocked drains, or punctures. It can also document clues such as interior stains or past ponding. Those clues help guide the next step; they don’t establish how far hidden moisture has spread.

What Requires Separate Equipment or Access

  • Infrared roof surveys: A thermal camera can identify temperature patterns that may indicate moisture beneath the surface. The method needs suitable roof and weather conditions, and suspect areas may need confirmation.
  • Electronic leak detection: Where the assembly is suitable, specialized equipment can locate breaches in the membrane.
  • Capacitance or impedance surveys: Readings taken across a compatible roof assembly can help map areas of suspected moisture.
  • Core samples: A small test cut can identify the roof layers and confirm conditions at the sampled location. The opening must be properly repaired.
  • Controlled water testing: A qualified professional may use this to investigate a suspected leak where the roof and building conditions allow.
  • Attachment testing: Specialized tests can evaluate fastener pullout resistance or how a roof assembly responds to uplift, depending on the method.
  • Restricted access: Above-ceiling areas and roof sections that require a lift or special permission may need separate arrangements.

If a visual finding could change the scope of a repair or replacement, ask what test would confirm it and what that test can rule out.

When Should Ypsilanti Building Owners Schedule an Inspection?

Armor recommends routine checks in spring and fall and after severe weather. A spring inspection can identify winter damage. A fall inspection can flag drainage and flashing problems before snow and ice arrive.

Other reasons to schedule a check include rooftop equipment work, new stains or drips, an upcoming property sale or purchase, or a warranty deadline. Older roofs and roofs with known problems may need more frequent attention.

What Happens After the Inspection?

Use the findings to decide what needs attention now and what can wait. An active leak or open seam may need prompt repair. A buildup of debris may call for maintenance. Suspected moisture beneath the membrane may need testing before you decide between a targeted repair, restoration, or replacement.

Keep the report and any photos with your roof records. They give the next inspector a baseline and help you budget for future work.

Schedule Your Commercial Roof Inspection in Ypsilanti, MI

Whether you manage a warehouse near Willow Run, a retail center along Washtenaw Avenue, or an office near Eastern Michigan University, start with what you know: where you’ve seen leaks, when the roof was last worked on, and which areas can be accessed. Contact Armor Commercial Roofing or call (517) 617-6953 to schedule an inspection for your Ypsilanti building.

Frequently Asked Questions

How long does a commercial roof inspection take in Ypsilanti?

Timing depends on roof size, layout, access, and whether the scope includes interior observations. Large or multilevel roofs can take longer, and separate testing may require another visit.

How often should a commercial roof be inspected?

Spring and fall are practical times for routine inspections. Consider an extra check after hail, high winds, or another severe storm. Follow any schedule required by your warranty.

Will a visual inspection find every leak?

No. It can identify surface defects and likely entry points. A moisture survey can help locate suspect wet areas, core samples can confirm conditions at specific spots, and electronic leak detection can locate membrane breaches on suitable assemblies.

What’s included in a commercial roof inspection report?

Armor provides a roof condition report and recommends repairs when indicated. A useful report identifies each finding and its location, explains the next step, and notes what couldn’t be confirmed. Ask whether labeled photos or priority ratings are included in your scope.

Can an inspection help with an insurance claim?

Dated photos and written findings can document visible conditions after a storm. Earlier inspection records may help show what changed. Ask your insurer what documentation it requires; the inspection report does not determine coverage.

Is a core sample harmful to my roof?

A core sample creates a small opening in the roof. A qualified roofer should confirm that sampling is appropriate for the system and promptly close the opening with a compatible repair.

Should I inspect my roof before buying a commercial property?

A pre-purchase inspection can identify visible defects, flag conditions that need testing, and help you budget for near-term repairs. A visual inspection alone can’t establish exactly how much service life remains.