Commercial Roof Repair in Adrian, MI That Stops Leaks at the Source

The first sign of a roof problem may be a brown ring on a ceiling tile, a bucket under a warehouse drip, or a musty smell in an upstairs office. The spot where water shows up indoors may be some distance from where it got through the roof.

Commercial roofs in Adrian face snow, repeated freezing and thawing, heavy spring rain, and summer heat. Over time, those conditions can wear on seams, flashing, and seals around rooftop equipment.

A lasting repair starts by finding where water gets in, choosing materials that match the existing roof, and checking the finished work. If you need commercial roof repair in Adrian, MI, call Armor Commercial Roofing at (517) 617-6953 to discuss your building and schedule an inspection.

Defects We Repair on Commercial Roofs

The symptoms may show up indoors, but the search for a roof leak often starts with these defects:

Open Seams and Laps

Single-ply and modified bitumen roofs use sheets joined at seams. Age, temperature swings, and rooftop traffic can loosen those joints and let water slip underneath.

Punctures and Cuts

Dropped screws, sharp scraps, storm debris, and equipment moved across the roof can puncture a membrane. Small holes are easy to miss, especially around rooftop units.

Blisters, Ridges, and Wrinkles

Trapped air or moisture can raise blisters. Ridges and wrinkles can also form as materials move. A raised area may not leak on its own, but it deserves a closer look if it splits or pulls on a seam.

Damaged Flashing

Flashing seals transitions at walls, curbs, roof edges, and skylights. If it cracks or pulls loose, water can get behind it.

Failed Penetration Seals

Pipes, vents, conduit, and equipment supports need seals where they pass through the roof. A split boot, loose clamp, or cracked sealant can give water a way in.

Ponding Water

Water still standing about two days after rain is a reason to check the drainage. Standing water adds weight and prolongs moisture exposure around seams and flashing. In cold weather, it can also freeze around outlets.

Worn Surfaces

Modified bitumen and built-up roofs can lose protective granules or gravel. Coatings can thin, chalk, or crack. Check worn areas to see whether the damage extends below the surface.

Rust and Loose Fasteners

On metal roofs, failed washers, loose fasteners, open laps, and corrosion can leave openings where water gets in.

These problems occur across the region. See Armor’s commercial roof repair services for more signs that a roof needs attention.

Repair Methods That Fit the Roof You Have

A patch can fail because it’s made from the wrong material. The first step is to identify the roof system and make sure the surrounding surface is sound enough for the repair to bond.

  • TPO and PVC: A compatible membrane patch can be heat-welded to a clean, sound section of the existing sheet.
  • EPDM rubber: A repair may use compatible primer, seam tape, or flashing after the surface is cleaned and prepared. See Armor’s guide to rubber roof repair for common problems with aging rubber membranes.
  • Modified bitumen: A compatible cap sheet can patch a damaged area. The application method depends on the existing assembly and the repair product.
  • Built-up roofing: A localized repair can replace damaged layers and restore the protective surface, including gravel where the system calls for it.
  • Metal roofs: Repairs may include replacing failed fasteners, sealing panel laps, or treating corrosion with products compatible with the panel finish.
  • Coated and spray foam roofs: The repair depends on what’s under the coating. Damaged foam or other unsound materials need attention before a compatible coating is applied.

The goal is a repair that bonds to the existing roof and can handle the movement of the surrounding material.

Commercial roof repair on a business building in Adrian, MI

Drainage and Flashing Checks

A patch can close an opening while leaving a clogged drain or loose flashing untouched. When leaks repeat, check how water moves across the roof and where it could get underneath.

Drainage Checks

  • Look for debris or damage at drains, scuppers, gutters, and downspouts.
  • Check the condition of drain strainers and clamping rings.
  • Look for low spots, dirt rings, and stains that show where water has collected.
  • Check whether crickets, the raised areas behind curbs or units, guide water toward outlets.

Flashing Checks

  • Look for loose perimeter metal or termination bars.
  • Check wall and parapet flashing, counterflashing, and coping for gaps.
  • Examine flashing around HVAC curbs, hatches, and skylights.
  • Check for splits or loose seals at pipe boots and other roof openings.

During an Adrian winter, ice at a drain can slow runoff and leave meltwater sitting near seams and curbs. If drainage or flashing is contributing to the leak, make sure the repair scope addresses that cause.

Roof drain and flashing check during commercial roof repair

Where a Localized Repair Reaches Its Limit

A spot repair often makes sense when the damage is limited and the surrounding roof is sound. These findings can point to a larger problem:

  • Widespread wet insulation: A surface patch won’t dry the insulation underneath. An assessment can help determine how much wet material needs to come out.
  • Leaks in different areas: Recurring leaks may point to several entry points or broader wear across the roof.
  • Seams failing across the roof: When several seams are opening, compare the cost and scope of continued patching with a larger repair or replacement.
  • A damaged deck: Corroded steel or soft wood decking needs evaluation before new roofing covers it.
  • Persistent ponding: If outlets are clear but water still pools, the roof may need a slope or drainage correction. Sagging can call for a separate structural evaluation.

Depending on the findings, the next step may be section replacement, restoration of a dry and sound roof, or full replacement. Ask which findings support the recommendation before approving the work.

How Completed Repairs Are Checked

The right check depends on the roof material and the work performed. A welded patch, a taped seam, and a drain repair call for different checks.

  • Welded seams: Once a TPO or PVC weld cools, a seam probe can help locate gaps. Taped seams should be evaluated using the manufacturer’s instructions.
  • Patches and flashing: Look for lifted edges, gaps, or overlaps that don’t meet the system requirements.
  • Drain flow: When practical, check that water can pass through any outlet cleared or repaired as part of the job.
  • Water testing: A controlled test may help investigate a hard-to-trace leak when the roof and site conditions allow.
  • Photos: Before-and-after images can document where the repair was made and what changed. Confirm whether they’re included in the repair scope.

After the next significant rain or snowmelt, check inside for fresh staining or dripping. If either returns, note where and when it appeared and contact your roofer.

Schedule Commercial Roof Repair in Adrian, MI

Addressing a leak early can help limit damage to insulation, ceilings, equipment, and inventory. Armor Commercial Roofing provides commercial roof repairs, from localized patching to restoration where the roof is a suitable candidate. Call (517) 617-6953 to schedule an inspection for your Adrian building.

FAQ

How do I know if my commercial roof needs repair?

Watch for ceiling stains, drips, loose flashing, blisters, or water that remains on the roof about two days after rain. Note when and where the signs appear so the roofer has a starting point.

Can you repair a commercial roof in winter?

Some repairs are possible in winter if the surface is dry and the materials can be applied within the manufacturer’s temperature limits. If conditions rule out a permanent repair, temporary protection may be an option until the weather improves.

Why does my roof keep leaking after it’s been patched?

Water may still be entering through another seam, a piece of flashing, or a roof opening. A clogged drain can leave water standing near the repair, and moisture already beneath the membrane can make the source harder to trace.

Will you tell me if I need a replacement instead of a repair?

An assessment can help distinguish a repairable defect from a larger roof failure. Widespread wet insulation, failing seams in several areas, and deck damage are reasons to review alternatives to spot repair.

What roof types do you repair?

Armor Commercial Roofing lists TPO, PVC, EPDM, modified bitumen, built-up roofing, and metal among the systems it repairs. If your roof has an existing coating or spray foam, mention it when you call so it can be considered during the assessment.